Company Profile

Coriolis Flow Meter Emerson Gear: High Precision Multi Variable Fluid Quality Meters from Silver Instruments

Quick Answer

If you are searching for a Coriolis flow meter Emerson Gear quote, you likely need a meter that reports mass flow, density, and temperature from one device. Silver Automation Instruments is a flow meter manufacturer that supplies the SI-CMF series Coriolis mass flow meter for this exact job. These meters are built for engineers who need stable readings on oil, chemicals, food fluids, and desalination brine.

What We Sell Versus Emerson Gear

Emerson gear is often used as a shorthand search term by project engineers and procurement teams. They want a reliable Coriolis mass flow meter but they also want a second supplier or a compatible replacement price. Silver Instruments supplies a direct alternative. Our SI-CMF series covers DN10 to DN200 and measures mass flow, volume flow, density, and temperature in real time.

Here is the thing. You do not need to replace the whole flow computer or wiring when you change suppliers. The SI-CMF outputs 4-20 mA HART, Modbus RTU, and pulse. That matches most existing control systems. The transmitter housing is IP66 rated. The wetted parts are 316L stainless steel as standard. Hastelloy C22 is available for corrosive chemical service.

High Precision Multivariable Output Without Extra Transmitters

A Coriolis meter pays for itself when you need mass flow plus density plus temperature in one pipe run. The SI-CMF series has a liquid mass flow accuracy of plus or minus 0.1 percent. Density accuracy is plus or minus 0.0005 grams per cubic centimeter. Temperature measurement uses a PT100 sensor with plus or minus 0.2 degrees Celsius accuracy.

These numbers matter in blending and billing. A 0.1 percent error on a 50,000 kg per hour crude oil line is 50 kg per hour. Over a full day that is more than one metric ton of unaccounted product. Most engineers skip this part until the mass balance fails. Then they call us.

Where These Meters Work Best

We have supplied SI-CMF meters to a paint manufacturer in Southeast Asia for solvent dosing. The line was DN15, flow range 0 to 2,000 kg per hour, and the fluid viscosity was around 120 centipoise. The meter held stable reading even when batch pressure changed from 3 bar to 8 bar.

Another project was a seawater desalination plant in Oman. They needed a seawater flow meter for a desalination plant with brine density output. The SI-CMF DN40 meter measured 0 to 18,000 kg per hour at 1.03 grams per cubic centimeter. The plant used 4-20 mA HART into an existing PLC. No extra density meter was installed.

Quote Request Details

To get a price from Silver Instruments, send us the following details: fluid name, flow range in kg per hour, pipe size DN, pressure in bar, temperature in degrees Celsius, density if known, and required approvals such as ATEX Zone 1 or food grade. Send this to Tel: +86-25-68650347 or Whatsapp: +86-25-52155837. WeChat is +86 15365082610.

In practice the quote process takes one working day for standard models. Custom wetted materials or high pressure ratings may take three days. We ship from our factory in China to Southeast Asia, Australia, the Middle East, Africa, and Latin America.

FAQ

Can this meter replace an Emerson Coriolis without changing pipe work?

In most cases yes. The SI-CMF series uses wafer or flange process connections. You need to confirm face to face length and flange standard such as ANSI 150 or DIN PN16. Send us the existing model tag and we will check dimensions.

What fluid quality parameters does the meter report?

The standard transmitter reports mass flow, volume flow, density, and temperature. Some models also calculate concentration for two component fluids. Fluid quality data is sent over HART or Modbus in